1. Wardrobe: tailor-made according to needs

    2. Wall-mounted wardrobe: The combination wardrobe in the bedroom is the kind of wardrobe that is made by closing one wall. The size of the wardrobe can be determined by the length of your own wall.

    3. Walk-in cloakroom: generally a closed space, with only a pile of wardrobes and a place where you can change clothes or pick up clothes; if the area of the bedroom is large enough, it can be designed as a closed cabin to put clothes. This forms the walk-in cloakroom. The walk-in cloakroom is the favorite of women, because they have a very large demand for the storage space in the room, and it is very important to design the limited space reasonably. According to the existing spatial pattern, the internal form of the cloakroom can be divided into: squares are mostly arranged in U-shape; deep and long in parallel arrangement is better; wide and long, suitable for L-shaped arrangement.

   (1) Cabinet style: traditional style has the largest reserves. "Cabinet" is the most traditional form of dressing room, and it is also the most capable of accommodating clothes. All costumes can find their own "home" in it. The "cabinet-style" dressing room is most suitable for families with a large amount of clothes. It can store the clothes of all family members in different categories.

   (2) Structural formula: light, simple and convenient to pick and place. The "structured" dressing room has eliminated the side panels of the cabinet and replaced it with modern metal columns. Its style is more modern and beautiful, more in line with the aesthetic concept of young people, and it is more convenient to pick and place clothes. However, the storage capacity of this kind of dressing room is slightly smaller, and its load-bearing capacity is not as good as that of the "cabinet-style" dressing room. Therefore, this kind of dressing room is more suitable for a two-person world or a family of three with a moderate amount of clothes and a relatively small variety.

   (3) Wall-mounted: avant-garde fashion is clear at a glance. Compared with the first two locker rooms, the “wall-mounted” locker room is more
Plus simple. The partition for placing clothes is directly fixed on the back panel of the dressing room, and the back panel is fixed on the wall and the ground. The entire dressing room uses the least plates and hardware, and the price is relatively cheap. The biggest feature of this kind of dressing room is that as long as you walk into the "walk-in dressing room", you can "see all your clothes at a glance." ---------------------(This type of Yadan has not been done for the time being)

    The doors of the walk-in cloakroom are generally designed as sliding doors. For the sliding doors of the cloakroom, the doors generally made are single-sided doors. There is also a double-sided sliding door, that is, one side of the door is front, and one side in the cloakroom is designed as a mirror. Such two-sided doors have different functions and strengthen the use effect of the cloakroom. When designing the cabinet, pay special attention to the coordination of the cabinet structure and the door. First, there must be a certain distance for the drawer. This distance must be determined by the position of the door, so that the door cannot be opened or the drawer cannot be opened. Second, the side panels on both sides must have enough fixing plates to support it. Avoid deformation of the side panels. For example, a small cabinet for socks and sundries can be designed on the side of the side panel instead of on the inner side, so that the side panel can be reinforced.

    Technical parameters of panel furniture:
    Bookcase: The vertical board is generally separated from 350mm to 800mm. The height of the shelf is normally 350mm to 400mm; the height of the shelf for the personalized design is generally 250mm for 32-open books, and 16-open books are placed The height of the shelf is 320 mm. The middle grid of the bookcase should be made of traps, so that the owner can store large items.
    The wardrobe is divided into a bedding area: the conventional design is on the highest level, and the height is 400 mm-550 mm
    Long clothing area: the height is 1400mm-1700mm
    Upper clothing area: height is 1000 mm-1200 mm
    Stacking area: 350mm-500mm in height
    Drawer: the width is 400 mm-800 mm, the height of the drawer surface is 160-200 mm
    Replace the drawer surface with glass: The walk-in cloakroom is open, so the underwear and commonly used bath towels should be stored in the drawer cabinet. The traditional chest of drawers are made of wood, while the latest chest of drawers is made of glass. This kind of chest of drawers is not only more beautiful, but also more convenient to take clothes.

    Tie grid (Baibaoge): Every successful man will have multiple ties. It is none other than tie grid to line up these ties. This kind of tie box occupies less space than a drawer, and the position is not limited, so the owner can arrange the position of the tie box at will.

    Pull-out shelf: It will be troublesome to put the stacked woolen clothes together. If you use the pull-out board, the stacked clothes can be organized, but it also has the disadvantage of less storage space, so please choose carefully.

    Trousers rack: The trousers racks have creases when stacked, but the trousers racks can leave no traces on the trousers. Therefore, the trousers rack in the cloakroom is necessary. It needs no less than 600mm of hanging space, so the trousers rack is usually Will be placed under the drawer, which saves more space.
  
    Dressing mirror: A dressing mirror is an indispensable configuration in the walk-in cloakroom. When you put on a beautiful new dress, you must take a picture in front of the mirror. Therefore, attach a dressing mirror to the side of the cabinet. forget. The height of the dressing mirror is 1000 mm-1400 mm, and the width is about 400 mm.

    Cabinet skirting: It depends on the skirting of the room where the cabinet is placed, generally 5 mm higher than the wall skirting; when the height of the wall skirting is unknown, the cabinet skirting height is designed to be 100 mm.

    Sliding doors: sliding doors are divided into closet doors, partition doors, folding doors, swing doors, and closet doors

    1. The frame of the wall cabinet door: galvanized steel has higher strength and is not easy to deform
    2. Pulleys: The lower load-bearing wheels of nylon fiberglass have large load-bearing capacity and strong wear resistance. The lower rail is equipped with anti-jumping cards for more safety.
    3. Identification of pulleys: repeated push and pull, no noise, no astringency, smooth sliding, and no skipping when moving the door

    Partition door:

    1. The frame aluminum-magnesium-titanium alloy has high strength, is not easy to wear, and is relatively light to push and pull. It can be placed in the kitchen, balcony, bathroom, etc.

    2. The lower wheel of the partition door is built-in, beautiful and practical